Author: taternews

📰 New article from Retro Handhelds

Retro Handhelds Deals of the Week

https://retrohandhelds.gg/retro-handhelds-deals-of-the-week/

Retro Handhelds Deals of the Week: Your Wallet’s New Best Friend 🎮💸

AliExpress is rolling out fresh Choice Day coupons—yes, they’re calling it a “Seasonal Sale,” but who cares when you’re saving $55 on a $459 order? Whether you go by RHH, USAFF, or CD codes, the savings scale nicely: $2 off $15 up to $55 off nearly $500. Pro tip: Stack them with other store-specific codes (like LOVE12, MF20, or ROVHQO71AX6M) for even deeper discounts.

Top Retro Picks Under $60:

• Anbernic RG40XXV: $44.49 on Amazon (even lower w/ RHH7)
• Miyoo Mini Flip: As low as $49.80 on AliExpress (RHH7)
• R36T: Just $35.16 on AliExpress (RHH4) — tiny, mighty, and budget-friendly

High-End Android Handhelds Still Shine:

• Anbernic RG477M: $224.48 (vs. $299.99 MSRP)
• AYN Thor Pro: $317.11 w/ RHH40
• MagicX Zero 40: $53.73 on Amazon (vs. $81.99)

Bonus Perks: Free games on Epic and Prime, sweet controller deals (8BitDo, GameSir), and mini PC steals—like the KAMRUI P2 for $206.99.

Whether you’re chasing N64 nostalgia or want to boot Elden Ring on the go, this week’s deals have you covered. Happy hunting—and may your battery last longer than your New Year’s resolutions! 🔋✨

📰 New article from RetroRGB

Arcooda 26″ 4:3, 2880×2160 (4K) LCD Arcade Monitor Tested

https://retrorgb.com/arcooda-26%e2%80%b3-43-2880×2160-4k-lcd-arcade-monitor-tested.html

Arcooda’s 4K Arcade Monitor Is the Best 4:3 LCD Yet — But Is It Worth It?

Bob from RetroRGB just livestreamed a deep dive into Arcooda’s new 26″ 4K (2880×2160) arcade monitor—and the verdict? It’s stupidly good for a 4:3 LCD. Not only does it outperform the 1080p version in sharpness and clarity, but it rivals high-end consumer 4K IPS panels. If you’re upgrading an arcade cabinet or building a retro setup and want authentic 4:3 proportions without CRT bulk, this is arguably the best option on the market.

But here’s the twist: You should feed it 1080p—not native 4K. Why? Because Arcooda’s panel does incredibly sharp integer scaling (think: 1080p → 4K), and the extra pixel density makes even HD sources pop. MiSTer users: set `video_mode=8`, stretch aspect ratio to “Full Screen” per-core, and enjoy crisp output plus 5x overscan via Vertical Crop. RetroTINK users: go generic 16:9 mode; OSSC users… well, good luck stretching natively.

Bottom line: If you already have arcade hardware and want a plug-and-play swap (especially with RGB input), the 4K Arcooda is worth the upgrade. But if budget’s tight or you’re just dipping into retro, the 1080p model remains a fantastic—and more affordable—option. And if you really want perfection? Go OLED—but be prepared to pay premium prices.

(Link to Patreon if you wanna keep supporting this kind of deep-dive testing.)

📰 New article from Retro Handhelds

Retro Handhelds Deals of the Week

https://retrohandhelds.gg/retro-handhelds-deals-of-the-week-3/

🎮 Retro Handheld Deals of the Week: AliExpress Coupons + Top Picks Under $60!

Looking to snag a retro handheld without blowing your budget? Retro Handhelds just dropped its weekly deal round-up — and AliExpress is rolling out massive coupon codes (yes, new ones for April!) to sweeten the deal.

🔥 Top Coupon Highlights

• RHH7 / USAFF7 / CD07US: $7 off orders $49+
• RHH16 / USAFF16: $16 off $109+
• RHH35 / USAFF35: $35 off $239+

💸 Best Budget Picks

• Anbernic RG40XXV: As low as $44.49 (AliExpress w/ RHH7)
• Miyoo Mini Flip: $49.80 (Ampown w/ RHH7)
• R36T: Just $35.16 (AliExpress w/ RHH4) — tiny but mighty!
• BatleXP G350: $40.66 (AliExpress w/ RHH4) — compact and affordable

📱 Android Powerhouses

• Anbernic RG476H: Down to $151.37 (AliExpress w/ RHH16)
• AYN Thor Pro: $357.11 (AliExpress w/ RHH40)
• MagicX Zero 40: $51 (AliExpress w/ RHH7) — Android freedom on a budget

🎮 Free Games!

Epic’s giving away Rebel Galaxy Outlaw, Tiny Tina’s Wonderlands, and more — all free for the taking via download.

🛒 Bonus Perks

• 8BitDo controllers on sale (as low as $22.50 w/ code)
• Mini PCs like the KAMRUI Pinova P2 for just $206.99

👉 Pro tip: Stack AliExpress coupons with store codes like `LOVE12` or `MF20` for extra savings!

Still shopping? Check their full list — from controllers to chargers, there’s something for every retro fan (and wallet).

📰 New article from RetroRGB

Conmdex 10Gbps USB A to C Cable

https://retrorgb.com/conmdex-10gbps-usb-a-to-c-cable.html

RetroRGB’s Cable Pick of the Day: The Conmdex 10Gbps USB-A to C — Finally, One That Actually Works

Let’s be real: most USB cables are a gamble. Advertised speeds? Optimistic fiction. Bend one too many times, and boom—frayed wires or data corruption. So when RetroRGB’s Bob finds a cable that meets its specs (and doesn’t break the bank), he screams from the rooftops. Or at least writes a newsletter blurb.

The Conmdex 10Gbps USB-A to C cable checks every box:

✅ Real, proven 10Gbps speeds (see that sweet screenshot!)

✅ Nylon-braided durability without the spaghetti-thick bulk

✅ Multiple lengths (3ft tested) and colors for your retro rig

✅ No flimsy connectors or sketchy chips

Sure, it’s not a retro cable per se—but if you’re hooking up a modern retro machine (looking at you, Raspberry Pi 4, Switch OLED, or high-speed flash cart reader), this cable won’t bottleneck your setup. And let’s be honest: even you deserve a cable that doesn’t make you question life choices every time you plug it in.

Bob’s not just sharing this to be nice—he’s saving you hours of Amazon returns and frustration. Smart nerds use verified gear. 😉

👉 Grab it here

(P.S. Maybe throw a few bucks on his Patreon too—he tests so you don’t have to.)

📰 New article from Retro Handhelds

Game of the Month: Mind Over Matter Requires Some Thought

https://retrohandhelds.gg/game-of-the-month-march-2026/

Could not retrieve a summary for this article.

📰 New article from Retro Handhelds

Retroid Pocket 6 12GB Discontinued, 8GB Price Hike Starts March 2

https://retrohandhelds.gg/retroid-pocket-6-12gb-discontinued-8gb-price-hike-starts-march-2/

Retroid Pocket 6 12GB Axed, 8GB Gets Pricier—And Scalpers Are Already Pouncing

Just days after AYN teased price hikes and production shifts for its Thor and Odin 3 line, Retroid dropped its own bombshell: the 12GB Retroid Pocket 6 is officially discontinued, with no new units coming. Worse? The 8GB model jumps $15 to $279 starting March 2—giving fans a narrow window to decide.

The culprit? Same as before: skyrocketing RAM and storage costs, plus ongoing supply chain headaches. Good news? Existing 12GB orders will still ship—so if you’re already on the list, breathe easy.

But here’s where it gets ugly: the 12GB model is already sold out across official channels, and scalpers are jumping in fast. Listings for $459–$599 are popping up—yes, more than the AYN Odin 3 Max ($449), which offers Snapdragon 8 Elite, 16GB RAM, and 512GB storage. Ouch.

In short: if you want the RP6, act fast—or wait for a (hopeful) future refresh. And maybe reconsider if paying premium prices makes sense when better hardware’s available for less.

(Source: RetroHandhelds)

📰 New article from Retro Handhelds

Savage Raven FissionGrip For Switch 2 Review

https://retrohandhelds.gg/savage-raven-fissiongrip-review/

Retro Handhelds Review: The Savage Raven FissionGrip Is Finally a Good Detachable Grip for Switch 2

Let’s be real—early detachable grips for the Nintendo Switch 2 were meh, at best. Loosely clinging to Joy-Cons with flimsy magnets, falling off mid-game… ugh. Enter Savage Raven’s FissionGrip, their most polished yet—and it actually works.

The key win? Secure fit without sacrificing modularity. Unlike the Genki Attack Vector or early Dbrand attempts, the Fission Grip keeps Joy-Cons snug (no tape required), and the central shell stays mostly intact thanks to clever side-flap support. Assembly? Slide-and-go in seconds—no fuss.

Ergonomics shine: Hard plastic grips mimic the Pro Controller’s texture, and the red/blue accents match Joy-Con 2 vibes. Bonus: The bundled Maxcarry case looks sleek and protective.

But wait—there’s one big “nah”: the lack of TPU. The Switch 2 is heavy, and hard plastic gets slippery during long sessions (especially in bed with the console perched over your face… we’ve all been there). A rubberized TPU option would be a game-changer—and Savage Raven knows it. (They’re clearly listening.)

Final Verdict:

✅ Best detachable grip yet

✅ Solid ergos & modularity

❌ Missing soft-grip option

If you want reliability and style—and can overlook the plastic texture—the FissionGrip is a no-brainer.

$29.99–$32.99 on Amazon / Savage Raven’s site.

📰 New article from TorrentFreak

UEFA Secures Pirate Site Blocking and (Global) Domain Suspension Order in India

https://torrentfreak.com/uefa-secures-pirate-site-blocking-and-global-domain-suspension-order-in-india/

UEFA Just Got a Global Power-Up Against Pirate Streams — And It’s Bigger Than It Looks

In a major win for sports rights holders, UEFA—backed by the Alliance of Creativity and Entertainment (ACE)—has secured a global domain suspension order in India, targeting 79 pirate streaming sites used to broadcast the Champions League and other top-tier matches.

Think of it as a digital takedown with teeth: Indian ISPs must block the sites locally, but crucially, 23 domain registrars—including GoDaddy, Tucows, and Squarespace—are also legally required to lock or suspend the domains worldwide. That means if your domain is on the list, it could go dark everywhere, not just in India.

The order uses an evolving legal tool called “Dynamic+” blocking, allowing UEFA to update the list in real time without returning to court—ideal for chasing狡猾 pirates who swap domains like flash mobs.

But here’s the twist: while Namecheap and others have complied in past cases, many of today’s targets remain online. Some sites are already redirecting to new domains or using more resilient registries (like Tonga’s government-run TLD for footybite.to). Registrars outside Indian jurisdiction may also be holding fire—at least for now.

Still, UEFA’s messaging is clear: Piracy just got harder to run at scale. As one exec put it, this is about protecting billions in broadcast value—and keeping fans, broadcasters, and clubs invested in the beautiful game.

The real test? Whether registrars with global reach truly act globally. For now, the cat-and-mouse game continues—one suspended domain at a time.

📰 New article from Retro Handhelds

dArkOS on the AISLPC RG52 Mini: How to Install

https://retrohandhelds.gg/darkos-on-the-aislpc-rg52-mini-how-to-install/

Quick Recap: dArkOS on the AISLPC RG52 Mini — Yes, It’s a Thing (and It’s Pretty Cool)

Less than a week after the AISLPC RG52 Mini hit shelves, developer bmdhacks dropped an early—but promising—fork of dArkOS, turning this budget-friendly handheld into a Debian-powered emulation powerhouse.

### What’s Inside?

• Full Debian Trixie userspace
• EmulationStation-fcamod + RetroArch
• Over 50 standalone emulators
• Bright future… but still v0.3, so expect bumps

### Before You Dive In:

✅ Get a good SD card (64–128GB) — skip the cheap stock one!

✅ Back it up, then toss it in a labeled box (we’ve all been there with unlabeled cards).

✅ Grab tools like Balena Etcher, 7-Zip/WinRAR, and a PC.

### TL;DR Install Steps:

1. Download & extract dArkOS package

2. Modify stock SD with the darkos-bootloader-tool in `ports_scripts/`

3. Boot RG52 Mini → run dArkOS Bootloader Mod from Ports menu

4. Write `darkos.img` to a fresh SD card via Etcher (or your fave tool)

5. Pop it in, boot, wait for auto-reboot → boom, Debian time

6. Add ROMs to the `EASYROMS` partition → done!

### Final Thoughts:

For $109.99 (or as low as $76.88 on AliExpress), the RG52 Mini is already a solid buy—but with dArkOS, it leaps into enthusiast territory. Bugs are expected, but the potential is huge.

What feature would you want next? PSP overdrive? HDMI out tweaks? Let us know in the comments or join the chat on Discord 🎮

📰 New article from RetroRGB

Raspberry Pi for 240p On PC CRT’s

https://retrorgb.com/raspberry-pi-for-240p-on-pc-crts.html

Unlock the Magic of 240p on Your Old CRT — With a $35 Raspberry Pi

Forget Upscaling. This is how video was meant to be seen.

That flicker of film grain, the smooth cadence of 24fps cinema — on a real CRT? Yes, and it’s shockingly easy to pull off with a Raspberry Pi, a $10 DAC (digital-to-analog converter), and some clever EDID trickery.

The RetroRGB guide walks you through turning any Raspberry Pi (even a Pi 400!) into a cinematic time machine. Hook it up to your vintage PC CRT (90s–2000s models with VGA), and suddenly 4:3 SD content — like old DVDs, anime rips, or hand-coded web videos — plays in native 240p/480i at the exact refresh rates they were meant for. No jitter. No judder. Just pure, analog motion.

Think of it as the missing link between film history and display tech:

✅ 23.98Hz (true cinematic frame rate)

➡️ 71.94Hz (3x for smooth CRT scanning)

➡️ You get buttery, film-like motion — not the choppiness of modern 60Hz scaling.

Bonus: The custom EDID plugin (and manual SSH method) lets you bake in those rare refresh rates directly into your Pi’s boot process — no driver hacks, no unstable workarounds. Just plug in and watch.

Want to go full analog? Add a scaler like the RetroTINK 4K, and you can even play original DVDs/VHS on your CRT — with retro-perfect timing.

CRT revival isn’t nostalgia. It’s corrective tech.

🔗 Full setup guide & gear links: RetroRGB

☕ Support the creator: Patreon